How to Replace the LCD Touch Screen on an iPad 7 (2019) 10 2 Inch (7th Gen)

Hey all people, it be Bennett from ProFixer. Today, I’m going to walk you with the aid of the technique of replacing the LCD touch display on an iPad 7th Generation (2019) 10.2-inch variation. One of the impressive things approximately this iPad variation is that you might replace simply the glass, unlike the iPad Pro models the place the LCD is fused to the digitizer. Everything I use in this educational, such as the digitizer, is linked inside the description under. Don’t omit to love this video, subscribe, and depart a comment with what you favor to work out in long term films. Without in addition ado, allow’s get commenced on making this iPad seventh Generation 10.2 new back.

Tools and Materials You’ll Need:
Razor blade
Plastic enjoying playing cards
Isopropyl alcohol
Acetone
Tweezers
Heat mat
Primer (Adhesion promoter)
Tessa tape
LCD substitute reveal
Small screwdriver set
Step-by-Step Guide:

Prepping the iPad

Heat the iPad: Place the iPad on a heat mat set to 60 tiers Celsius for a couple of minutes to soften the adhesive.
Inspect the Damage: This unique iPad has a significant crack across the monitor yet no shatter factors, suggesting it can have been repaired earlier than, though it appears not going because of the its new condition.

Removing the Digitizer

Insert a Razor Blade: Use a razor blade to create an opening among the iPad’s body and the reveal, permitting area for a plastic enjoying card.
Cut the Adhesive: Slide the playing card round the edges to minimize the adhesive. Be cautious no longer to insert the cardboard too a ways on the perfect aspect where the flex cables and home button flex cable are found.
3. Opening the iPad
Open Like a Book: Carefully open the iPad like a book and leisure it on your workbench.
Remove Debris: If there may be any debris on the LCD, wait until you cast off the LCD to blow it off to hinder smudges or damage.
four. Removing the LCD
Pry the LCD: Use tweezers to raise the edges of the LCD, that is glued in with a mighty but genuinely removable adhesive.
Disconnect the LCD: Lift the ground of the LCD and circulate it forward approximately 0.5 an inch to soundly bend the flex cable. Then, dispose of the screw masking the battery and insert a battery isolation instrument.
five. Preparing for New Screen Installation
Clean the Bezel: Use a brand new razor blade to scrape off the bulk adhesive. Be careful round Wi-Fi flexes.
Use Acetone and Isopropyl Alcohol: Apply acetone to do away with adhesive residue, then smooth up with isopropyl alcohol.
Apply Primer: Apply primer to the cleaned bezel to activate the adhesive residences of the brand new Tessa tape.

Installing the New Screen

Apply Tessa Tape: Apply Tessa tape to the recent screen, significantly on components with no pre-utilized adhesive.
Test the New Screen: Before remaining set up, join the brand new reveal to the iPad and vigor it directly to verify actual touch capability.

Installing the Home Button

Heat and Remove the Old Button: Heat the vintage display to soften the adhesive and punctiliously dispose of the house button.
Apply Adhesive and Primer: Apply primer and new adhesive to the house button facet on the recent screen.
Attach the Home Button: Carefully align and fix the home button to the brand new display.
8. Final Assembly
Reattach Flex Cables: Reconnect the digitizer and LCD flex cables.
Secure the Screen: Once the whole lot is attached and established, apply tension around the perimeters to ensure that the recent monitor is firmly attached.
Power Up and Test: Turn on the iPad to ascertain every little thing is working in fact, inclusive of the home button and touch screen.

By following those steps, you’ll be able to effectually substitute the LCD contact display on your iPad seventh Generation 10.2-inch edition. Remember to handle each one element with care to prevent spoil, exceptionally the tender flex cables. If you came upon this tutorial helpful, please like the video, subscribe to the channel, and let us recognize within the reviews what other repairs you’d prefer to see. Happy fixing!